Insulating Ceramic Coating

SuperTherm® is a ceramic based, water-borne, insulating coating, designed to reflect heat and reduce energy costs. The only ceramic coating on the market developed with the assistance of NASA, SuperTherm® is the most effective and longest lasting ceramic coating on the market.


Liquid Reinforcement Coating

 RustGrip® is a metallic-based, moisture-cure polyurethane encapsulating coating that will coat over most surfaces to seal them up against further corrosion, weathering, and physical wear. RustGrip® is a three-coats-in-one system that acts as a primer, intermediate, and topcoat in one.

 In its design, RustGrip® will apply over a surface and immediately find the pores of the surface and immediately fill them. Within an hour of application, it will begin its cure cycle. During this cure cycle, it will pull moisture from the air and begin to microscopically swell within the individual pores as it hardens. This process anchors the coating and seals against any possibility of air, moisture, or any minerals attacking the surface causing any further corrosion of any kind.

Hot Pipe Coating (HPC)®

Extreme Temperature Coating

 Hot Pipe Coating© (HPC) is a ceramic based, water-borne insulating coating, designed to insulate in extreme heat situations, and can be used both as a base coat / primer and build coats to achieve the desired thickness. HPC provides for safer surfaces and overcomes all the downfalls of conventional insulation.


Enamel Protective Coating

 EnamoGrip® is a tough, moisture curing, two-component polyurethane enamel, which produces a uniquely hard and durable coating film. EnamoGrip® will demonstrate unsurpassed semi-gloss retention, colour-retention, graffiti-resistance, and chalk resistance, when utilized for exterior coating situations, and will provide outstanding resistance to water and humidity, stains, chemicals, and solvents, as well as tremendous scuff-, mar-, and impact-resistance.

Moist Metal Grip®

Liquid Reinforcement Coating

 Moist Metal Grip® is a two-part epoxy designed to provide a water resistant, anti-corrosion coating to wet and submerged surfaces. Moist Metal Grip® is extremely flexible, tough, and durable.


Liquid Roofing Membrane

 EnduRoof is a one component aliphatic polyurethane fluid which cures with the humidity in the atmosphere. It is based on pure elastomeric hydrophobic aliphatic polyurethane resin plus special inorganic fillers, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

EnduRoof 2K

Two Component Liquid Membrane Coating

 EnduRoof 2K is a fast-curing, two- component, bitumen-extended polyurethane fluid. It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties. It is based on pure elastomeric hydrophobic polyurethane resin and is extended with chemically polymerized virgin bitumen.

Lining-Kote 6000®

Corrosive Environment Protection

 Lining-Kote 6000 is a two-part epoxy designed to protect against the harshest acid, base, and solvent environments. Lining-Kote 6000 is extremely tough and durable, yet flexible to provide the best possible protection.

Graffity Cleaner®

Safe and Easy Cleaning

Graffiti Cleaner is a liquid cleaner for removing graffiti, made from a blend of glycol esthers and other chemicals. It will remove most types of paints, including “Krylon” spray paints and magic markers. It is extremely environmentally friendly and easy to use.

Mastic Sealing Tape®

Complete Sealing and Protection

Mastic Sealing Tape is used on seams of metal buildings to cover and seal seams and screw heads to against water and leaks. The membrane imbedded on the top of the tape is designed to bond with various coatings to completely seal the roofing structure.