|
|
RustGrip ® - Product Information
Benefits
-
Excellent for minimally prepared surfaces, ie.
No sandblasting
-
Protects steel, aluminum, concrete, wood, fibreglass, lead-based
paints, polyurethane foam, and other coatings.
-
Extremely tough, it makes an excellent floor coating.
-
Submergible in 100% nitric acid without any effects. Designed to
withstand acids, salts and caustics with no loss of strength.
-
Rated
as a Class A fire coating. In case of fire, Rust Grip® will help to
prevent spread of, and will not contribute to, the burn.
-
Certified by the EPA for encapsulation of lead-based paints and
asbestos.
-
Prevents mold and mildew from forming.
-
USDA
approved for use in and around food preparation areas.
-
15+
year lifespan on roofing under normal conditions.
Uses
-
Corrosion and weathering protection. RustGrip® is UV-controlled and
is not affected by hostile environments.
-
Overcoat rusted areas to stop and control corrosion activities. Rust
Grip® will seal out any contact with moisture and air or chemical
pollutants that breed corrosion activity.
-
Prime
metal before over-coating.
-
Prevention of
corrosion.
-
Protect floors to prevent wear and damage.
-
Anti-slip coating when combined with aggregates, for use around high
traffic areas.
-
Protection from acid splash or pooling. It will not allow acids to
penetrate to affect the surface.
-
Encapsulate and seal lead-based paints, asbestos, or other hazardous
materials.
Application:
Although
RustGrip® can be applied by non-professionals, SC2 Trading recommends
using a certified applicator. To get more information, please contact us
at info@sc2trading.com
Preparation:
-
Surface must be clean and completely dry, with no loose debris or
particles, dirt, oil, films or residues of any kind. RustGrip® will
cover rust and other coatings if they are fully adhered to the
surface.
-
Stir
MECHANICALLY very well, as the metallics tend to settle out.
Application methods:
-
Airless or pot sprayed: tip size .018-.020. Non-rusted steel: apply
in one coat using crosshatch method. Rusted steel: apply in two
coats using crosshatch method. For other surfaces apply in two
coats.
-
Roller or brush: apply in two coats.
-
Add an
additional coat for vertical surfaces
|
Applied
rate: |
Rusty - 4.90m2/liter. Non-Rusty - 7.35m2/liter. |
|
Film
thickness: |
Wet: Rusty - 0.127-0.200mm Non-Rusty -
0.076-0.100mm
Dry: Rusty - 0.076-0.100mm Non-Rusty -
0.038-0.051mm |
|
Temperature: |
0°C (32°F) -
90°C (194°F). 22° (72°F) best. |
|
Dry times:
|
1
hour to touch @ 22°C. 2 hours to re-coat. Re-coat with self
within 4 hrs. If over coating with any other paint product, do
so within 2 weeks. |
|
Full cure: |
7 - 10 days. |
|
Precautions: |
RustGrip® is so tough it will not wash off hands.
Do not leave unused portion of pail opened for longer than 4
hours. |
|
Limitations
-
Silver / grey in colour, it
cannot be tinted due to the metallics in the formula. (And
the metallics is what makes the product so strong)
-
Not for use over wet or moist
surfaces. Surfaces must be completely dry.
-
Not for use in situations of
constant underwater exposure.
-
Not recommended for use around
high ammonia levels.
-
Not for use on food preparation
surfaces that are in direct contact with foodstuffs.
|
< Back
|
|
|
© Copyright 2006 SC2 TRADING All Rights Reserved. |
|
|
