Benefits

• Self-leveling when applied, gives a glossy, smooth-finished surface appearance.

• Applied as a clear coat, or is tintable to any colour desired.

• Extremely tough, EnamoGrip® makes an excellent floor coating.

• Easily applied to steel, aluminum, concrete or wood.

• Exceptional graffiti-resistance.

• Submergible - water resistant

• 20+ year lifespan on roofing under normal conditions.

Uses

• Topcoat over RustGrip® when specific colour is needed, to give a long life to the surface, or to protect against water ponding.

• Applied over SuperTherm® to give the best possible protection for a substrate, or to protect against water ponding.

• Protects against UV, wear, weathering, and moisture penetration.

• Seals against breathing moisture/gases and protect against weathering and acid/solvent contact.

• Anti-graffiti protection for surfaces. Applied and cured, EnamoGrip® can resist the permanent damage of vandalism.

• Vehicle and equipment finishes.

• Flooring, especially when combined with anti-slip elements.

Application

Although EnamoGrip® can be applied by non-professionals, SC2 Trading recommends using a certified applicator. To get more information, please contact us at info@sc2trading.com

Preparation

• Surface must be clean and completely dry, with no loose debris or particles, rust, dirt, oil, films or residues of any kind. EnamoGrip® will cover previous coatings if they are fully adhered to the surface.

• Mechanically stir base.

• Mix curing agent into base and let sit for 30 minutes before applying.

Application methods

• Airless or pot sprayed: tip size 0.66mm; apply in two coats.

• Roller: use ¼” nap commercial roller; apply in two coats.

• Brush: apply in two coats

• Add an additional coat for vertical surfaces

< Back