Menu overview

- About
- Products
      -> SuperTherm
      -> RustGrip
      -> EnamoGrip
      -> Hot Pipe Coating
      -> Moist Metal Grip
      -> EnduRoof
      -> EnduRoof 2K
      -> more...
- References
- Distributors
- Contact

 

Products Overview

 

 

Insulating Ceramic Coating

 

SuperTherm® is a ceramic based, water-borne, insulating coating, designed to reflect heat and reduce energy costs. The only ceramic coating on the market developed with the assistance of NASA, SuperTherm® is the most effective and longest lasting ceramic coating on the market.

 

Read more >

 



 

 

Liquid Reinforcement Coating

 

RustGrip® is a metallic-based, moisture-cure polyurethane encapsulating coating that will coat over most surfaces to seal them up against further corrosion, weathering, and physical wear. RustGrip® is a three-coats-in-one system that acts as a primer, intermediate, and topcoat in one.

 

In its design, RustGrip® will apply over a surface and immediately find the pores of the surface and immediately fill them. Within an hour of application, it will begin its cure cycle. During this cure cycle, it will pull moisture from the air and begin to microscopically swell within the individual pores as it hardens. This process anchors the coating and seals against any possibility of air, moisture, or any minerals attacking the surface causing any further corrosion of any kind.


Read more >

 



 

 

Extreme Temperature Coating

 

Hot Pipe Coating© (HPC) is a ceramic based, water-borne insulating coating, designed to insulate in extreme heat situations, and can be used both as a base coat / primer and build coats to achieve the desired thickness. HPC provides for safer surfaces and overcomes all the downfalls of conventional insulation.


Read more >

 



 

 

Enamel Protective Coating

 

EnamoGrip® is a tough, moisture curing, two-component polyurethane enamel, which produces a uniquely hard and durable coating film. EnamoGrip® will demonstrate unsurpassed semi-gloss retention, colour-retention, graffiti-resistance, and chalk resistance, when utilized for exterior coating situations, and will provide outstanding resistance to water and humidity, stains, chemicals, and solvents, as well as tremendous scuff-, mar-, and impact-resistance.


Read more >

 



 

 

Liquid Reinforcement Coating

 

Moist Metal Grip® is a two-part epoxy designed to provide a water resistant, anti-corrosion coating to wet and submerged surfaces. Moist Metal Grip® is extremely flexible, tough, and durable.

 

Read more >

 



 

 

Liquid Roofing Membrane

 

EnduRoof is a one component aliphatic polyurethane fluid which cures with the humidity in the atmosphere. It is based on pure elastomeric hydrophobic aliphatic polyurethane resin plus special inorganic fillers, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

 

Read more >

 



 

 

Two Component Liquid Membrane Coating

 

EnduRoof 2K is a fast-curing, two- component, bitumen-extended polyurethane fluid. It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties. It is based on pure elastomeric hydrophobic polyurethane resin and is extended with chemically polymerized virgin bitumen.

 

Read more >

 



 

 

Inner Seall®

 

 When Inner Seal® is sprayed or poured on the surface, it soaks deep into the concrete. When contact is made with the alkali in the concrete, it solidifies into a gel, chemically changing the alkali forever. This gels flows in all directions, filling the pores and hairline cracks, emulsifying any oil, acid, juice etc, pushing it to the top to be washed away.


Read more >

 



 

 

SP2001F Fire Coatingg®

 

SP2001F Fire Coating is a ceramic-based, intumiscent, water-borne, fireproofing coating, that will give a 1 or 2 hour fire rating, depending on the thickness applied.


Read more >

 


 

 

 

EpoxoTherm®

Submersible Insulating Ceramic Coating

 

EpoxoTherm is a ceramic-based, two-part epoxy with the ability to be submerged and add insulation value to the substrate it is coated over. It is also built to insulated wet surfaces. It combines the ceramics of SuperTherm® for exceptional reflective and insulative abilities, with the toughness and submersible capabilities of the best epoxies


Read more >

 


 

 

 

Lining-Kote 6000®

Corrosive Environment Protection

 

Lining-Kote 6000 is a two-part epoxy designed to protect against the harshest acid, base, and solvent environments. Lining-Kote 6000 is extremely tough and durable, yet flexible to provide the best possible protection.


Read more >

 


 

 

 

 Super Base (HS)®

High Performance Base Coat and Primer

 

SuperBase (HS) is a base coat and primer designed to seal cracks, weather seal, and cover surfaces in preparation for the application of SuperTherm®. SuperBase (HS)is designed from the highest-performance, elastomeric, specially formulated acrylics on the market to provide long lasting sealing and protection.


Read more >

 


 

 

 

Graffity Cleaner®

Safe and Easy Cleaning

 

Graffiti Cleaner is a liquid cleaner for removing graffiti, made from a blend of glycol esthers and other chemicals. It will remove most types of paints, including “Krylon” spray paints and magic markers. It is extremely environmentally friendly and easy to use.


Read more >

 


 

 

 

Mastic Sealing Tape®

Complete Sealing and Protection

 

Mastic Sealing Tape is used on seams of metal buildings to cover and seal seams and screw heads to against water and leaks. The membrane imbedded on the top of the tape is designed to bond with various coatings to completely seal the roofing structure.


Read more >

 

 

 

Superior Coatings & Concrete Trading

Beverweertseweg 60, 3985 RE, Werkhoven

The Netherlands

KvK nr: 8150219

General Terms - Algemeine konditionen - Algemene Voorwaarden - Contact

z