Menu overview

- About
- Products
      -> SuperTherm
      -> RustGrip
      -> EnamoGrip
      -> Hot Pipe Coating
      -> Moist Metal Grip
      -> EnduRoof
      -> EnduRoof 2K
      -> more...
- References
- Distributors
- Contact

Moist Metal Grip® is a two-part epoxy designed to provide a water resistant, anti-corrosion coating to wet and submerged surfaces. Moist Metal Grip® is extremely flexible, tough, and durable.

 

  • Prevents corrosion of coated materials from the damaging effects of submersion or constant moisture exposure.

  • Applied to moist or condensating pipes or metal surfaces that cannot be dried or stopped to dry before applying a corrosion coating.

  • Submergible after only 48 hours of cure time. Finishes curing while submerged.

  • Displaces the moisture on the surface and the epoxies attach to the metal surface and cures chemically.

  • Acid and chemical resistant.

  • Smooth finish, self-levelling and can be tinted any color desired.

  • Can be applied to steel, aluminum, wood, and concrete.

  • Apply to wet surfaces that cannot be dried before applying a corrosion coating.

  • Use for all metal and concrete surfaces that are exposed to constant water pooling or condensation. If metal is to be submerged, use Moist Metal Grip® to protect it while under water.

  • Can be used to protect inside of water tanks. Moist Metal Grip® is a polyamide formula base that is safe for potable water uses.

  • Can be applied over metal or concrete surfaces that are also flooring. Moist Metal Grip® is tough enough to withstand traffic.

Although Moist Metal Grip® can be applied by non-professionals, SC2 Trading recommends using a certified applicator. To get more information, please contact us at info@sc2trading.com

 

Preparation

  • Surface must be clean with no loose debris or particles, rust, dirt, oil, films or residues of any kind. Moist Metal Grip® will cover previous coatings if they are fully adhered to the surface.

  • Mechanically stir base.

  • Mix curing agent into base and let sit for 30 minutes before applying.

 

Application methods

  • Airless or pot sprayed: tip size .015; apply in two coats.

  • Roller or brush: apply in three coats.

  • Add an additional coat for vertical surfaces

 

Applied rate: Metal: 6.14m2/liter    Concrete: 4.90m2/liter
Film thickness: Wet: 0.25-0.35mm    Dry: 0.130-0.180mm
Temperature: 0°C (32°F) - 38°C (100°F)
Colder temperatures will increase dry time.
Dry times: 4 hours to touch.
10 hours to recoat.
Recommended applying first coat at night.
Full cure: 10 days. Can be submerged after 48 hours.
Precautions: 6-8 hour pot life.
Limitations

- Do not use as a single-corrosion coat system exposed to the sun. Epoxies will chalk when exposed to UV over time.
- On food preparation surfaces that are in direct contact with foodstuffs.
- Do not apply over chlorinated rubber. Even after sandblasting, the chlorination can attack the solvents and brittle the coating.
 

 

 

Coming soon...

RustGrip® projects

 
 

Superior Coatings & Concrete Trading

Beverweertseweg 60, 3985 RE, Werkhoven

The Netherlands

KvK nr: 8150219

General Terms - Algemeine konditionen - Algemene Voorwaarden - Contact

zz zzz